Request Information
Meeting NEC and UL® 2043 Code Requirements for the Installation of Equipment and Power in the Plenum or Ceiling Space®

It's 14" x 14" and almost 5" high allow many different types and sizes of equipment to be installed inside its extremely Strong Aluminum Interior. For example, some of the many products from Companies such as Crestron®, AMX ®, Altec Lancing Commstar®, Extron® and all Nigel B Products etc., have been Installation tested.
Unit of Measure

Technical Specs

Brands

 N/A Nigel B. Design®

Interior Width

 N/A 14 in

Interior Depth

 N/A 14 in

Interior Height

 N/A 4.75 in

Mount Type

 N/A Unistrut® Mount

Used For

 N/A Projector

Pipe Fitting

 N/A 1-1/2 in

Additional Information

Additional Information

 N/A Heavy-Duty Pole Mount Bracket

The Heavy-Duty NB-PEBPM Pole Mount used in the Pole Mount Version of the Plenum Box has been engineered to take weights in excess of 150 lbs.

Flat Surface/Wall Mount Or Hanging

The NB-PLWB comes with a Flat Surface/Wall Mount, allowing the Plenum Equipment Box to be attached to any Wall, Flat Surface or Suspended using our NB-PLHK Hanging Kits, which are UL/CSA rated to 100 lbs.

The Plenum Equipment Enclosure

The Enclosure itself is not itself load restricted, as the weight limit is determined mainly by the suspension method used (Pole, Cable or Unistrut®). Made from 0.060" Aircraft Grade Aluminum the Enclosure itself will safely hold 50 lbs of installed Equipment.

Wiring And Cable Entry

More than enough Wiring and Cable Entry and Exits Ports are provided. For the Pole Mount Version, most Cables are run inside the Pole. In addition 1 Port is for Power and an additional one is available for other uses. For the Flat Surface Mount/Hanging version, one is used for Power and two additional ports are available for connection to additional 1/2" conduits.

Note

Note

 N/A The Pole Mounted Plenum Enclosures uses standard 1-1/2" Pipe fittings, the Equipment Enclosure can be easily attached to the Projector's Pole

Made in USA